Forum Problems Installing LAMS: Re: Re: install and monitor lesson always stop at 70%


 
Search: 

3: Re: Re: install and monitor lesson always stop at 70%
In response to 2 07/27/09 11:25 PM
[ Reply | Forward ]
Thank you for taking your time.

(1) Most of part I see on the website is in Englsih. But I can see the mandarin on web if I type.(please check out the file I attach)

(3) is that some require for LAMS in server? Should I prepare bigger HD or RAM or something for LAMS?

Thank you

Posted by verna wei

Attachments:
4: Re: Re: Re: install and monitor lesson always stop at 70%
In response to 3 07/27/09 11:56 PM
[ Reply | Forward ]
Hi Verna,

Try to change your user profile to English (see "My Profile" tab, then Edit My Profile and switch to English. Then, click on the Monitor link and see if it passes 70%.

Thanks,

Ernie

Posted by Ernie Ghiglione

5: Re: Re: Re: install and monitor lesson always stop at 70%
In response to 3 07/27/09 11:58 PM
[ Reply | Forward ]
Sorry, I just realized I didn't explain why I asked you to change to English... I believe the reason it might be getting stuck is because the Taiwan translation is not complete.

When Flash loads, it tries to get from the server all the labels in taiwanese. If these labels aren't there, that's when it usually gets stuck.

Hope that makes sense.

Thanks,

Ernie

Posted by Ernie Ghiglione

6: Re: Re: Re: Re: install and monitor lesson always stop at 70%
In response to 5 08/11/09 09:09 AM
[ Reply | Forward ]
Here is a good message and an another question.
I setup another platform for LAMS.
It works.

Thank you for helping.

Here is another question.

is it possible that not use username be the keyword between moodle and LAMS? My user on the moodle usually type First Name and Surname in Mandarin(ex:attach-1). The name become ??? ????? in LAMS(include the Folder Name)
(ex:attach-2;attach-3).
Thank you.

Posted by verna wei

7: Re: Re: Re: Re: Re: install and monitor lesson always stop at 70%
In response to 6 08/11/09 09:15 AM
[ Reply | Forward ]
Here is the Attach File.

Posted by verna wei

Attachments:
8: Re: Re: Re: Re: Re: Re: install and monitor lesson always stop at 70%
In response to 7 08/11/09 09:19 AM
[ Reply | Forward ]
Here is the Attach File-2.

Posted by verna wei

Attachments:
9: Re: Re: Re: Re: Re: Re: Re: install and monitor lesson always stop at 70%
In response to 8 08/11/09 09:20 AM
[ Reply | Forward ]
attach-3

Posted by verna wei

Attachments:
10: Re: Re: Re: Re: Re: install and monitor lesson always stop at 70%
In response to 6 08/11/09 06:26 PM
[ Reply | Forward ]
Hi Verna,

I think that's an encoding issue that we have solved already. I created an account in our Moodle LAMS testing site with name in Chinese characters and it works no problem (see pictures for LAMS and Moodle).

Have you used the latest code for the LAMS Moodle module?

http://lamscommunity.org/2.0/integrations/moodle/lamstwo.zip

Thanks,

Ernie

Posted by Ernie Ghiglione

11: Re: Re: Re: Re: Re: Re: install and monitor lesson always stop at 70%
In response to 10 08/11/09 06:26 PM
[ Reply | Forward ]
Ooopss! forgot the attachments

Posted by Ernie Ghiglione

Attachments:
12: Re: Re: Re: Re: Re: Re: Re: install and monitor lesson always stop at 70%
In response to 11 08/14/09 04:05 AM
[ Reply | Forward ]
Hi Ernie,
Thank you for answering.
I am really appreciated.

I setup again with the file you offered.
It's still the same.
there are two problems on my website:
(1) the encode problem
as before I said.
(2) the role are not that right.
Only the admin role (in Moodle) can modify/link/monitor the LAMS class.
others can't do anything beside see.
(please see the attach file)

would you mind send me your email, then I can send you the website address with login account?

verna

Posted by verna wei

Attachments:
13: Re: Re: Re: Re: Re: Re: Re: Re: install and monitor lesson always stop at 70%
In response to 12 08/14/09 04:08 AM
[ Reply | Forward ]
I can only post with one attach.

Posted by verna wei

Attachments:
14: Re: Re: Re: Re: Re: Re: Re: Re: install and monitor lesson always stop at 70%
In response to 12 08/14/09 09:46 PM
[ Reply | Forward ]
> (1) the encode problem as before I said.

Are you using the latest code as I mentioned before?

> (2) the role are not that right.

If you are sure that the user does have teacher role within the course, the check the following:

Login as Admin, then go to the course and select "Assign roles", click on "Override permissions" and then "teacher". Scroll down and find LAMS.... it should look like in the picture attached.

Ernie

Posted by Ernie Ghiglione

Attachments:
15: about the encode and role
In response to 14 08/20/09 12:49 AM
[ Reply | Forward ]
(1) I did. I really sure.
I am going to make another platform to setup everything again.
(2) I don't have any permissions setting about LAMS, even for the admin role. But I(admin) can use LAMS. >_<

It doesn't show up anything about LAMS on the list (user>permission>define role>admin)

Posted by verna wei

16: Re: about the encode and role
In response to 15 08/20/09 07:12 PM
[ Reply | Forward ]
> (2) I don't have any permissions setting about LAMS, even for the admin role. But I(admin) can use LAMS. >_<
>
>It doesn't show up anything about LAMS on the list (user>permission>define role>admin)

Create a user in Moodle and give it teacher rights for a course, then with that user, go into the course, turn editing *on* and then add a LAMS activity. You should be able to see the "Open Author" and "Add lesson" buttons.

Posted by Ernie Ghiglione

17: Re: Re: about the encode and role
In response to 16 09/02/09 06:20 AM
[ Reply | Forward ]
Hi,
I have been working on the lams & moodle for a while.
It's very great. I appreciated Ernie helped a lot.

I got some summary and new problems.
summary:
(1) The platform Effects the system.
First time, I install lams with moodle(in the same server).
It always stop at 70% when I open the LAMS server from moodle.
Once I setup LAMS in a independent server. It works.

(2) the authority:(ex: attach server2)
After you install moodle in begining, you will see the LAMS in your system.
Don't uninstall it.
If you uninstall it, you can't find any thing about LAMS on permission. And you only have two kinds of roles about LAMS on that server.(Full or Nothing)

Problems::(ex: attach server1)
In my platform, I recall the "LAMS". It has different view/authority for different role.
But I don't have the "Delete the lesson" button anymore.
what's wrong!?

Thank you

Posted by verna wei

18: Re: Re: Re: about the encode and role
In response to 17 09/02/09 06:23 AM
[ Reply | Forward ]
attach file

Posted by verna wei

Attachments:
19: Re: Re: Re: about the encode and role
In response to 17 09/02/09 10:43 PM
[ Reply | Forward ]
Hi Verna,

> (1) The platform Effects the system.

Can you do me a favor and test this on our Moodle-LAMS demo site:

http://moodle.lamscommunity.org/moodle

You can sign up for an account there. Make sure you choose Chinese in your profile.


> (2) the authority:(ex: attach server2)

Jun-Dir has fix this now. If you download the latest LAMS Moodle module from the Downloads page, you should be good.


Thanks,

Ernie

Posted by Ernie Ghiglione

Reply to first post on this page
Back to Problems Installing LAMS