Forum LAMS for Tech-Heads - General Forum: Re: Re: Re: Re: Re: Re: Re: LAMS 2.0.1 is out!

Back to LAMS for Tech-Heads - General Forum
	Search:

	20: Re: Re: Re: Re: Re: Re: Re: LAMS 2.0.1 is out! By: Timothy Allen	In response to 18	03/14/07 07:22 AM	[ Reply \| Forward ]
Hi Fiona, I made all the changes you suggested and then loaded an sequence into the design screen. I then exported it in both LD and LAMS formats without apparent problems. I then tried to import it back in from the exported files. When I tried to import the IMS LD format export file I got the following error message: ========================================================= Import tool content Learning design import failed The reason is [org.lamsfoundation.lams.learningdesign.service.ImportToolContentException] ========================================================= However, importing the LAMS format file seemed to work successfully. Just a FYI, Tim. Posted by Timothy Allen

	21: Re: Re: Re: Re: Re: Re: Re: Re: LAMS 2.0.1 is out! By: Fiona Malikoff	In response to 20	03/14/07 04:46 PM	[ Reply \| Forward ]
Tim, Thanks for the kind words in your earlier posting. The LD is only "export" at the moment. You can't import it back in. If you want to import it in, you have to use the LAMS format. So your problem is not unexpected. But we obviously don't say that on the screen, or you wouldn't have tried it. :-> I've just raised a task to add a clarification message on the screen in LAMS 2.0.2. Thanks for the feedback. Fiona Posted by Fiona Malikoff

Reply to first post on this page

Back to LAMS for Tech-Heads - General Forum