Forum LAMS for Tech-Heads - General Forum: Re: export tool failure

Back to LAMS for Tech-Heads - General Forum
	Search:

	2: Re: export tool failure By: giorgos fakiolakis	In response to 1	01/07/14 05:39 AM	[ Reply \| Forward ]
Making some "experiments" i found that trying export any sequence as an IMS package the tool is working! After this, trying to export the same sequence as a LAMS sequence the tool is working too!!! If you open another sequence you have to do the same: First, export as an IMS pack and then export as a LAMS sequence... Posted by giorgos fakiolakis

	3: Re: Re: export tool failure By: Ana Lovic	In response to 2	01/08/14 05:35 AM	[ Reply \| Forward ]
Hi Giorgos! Have you tried to export it to IMS and it works? I also tried to do it and I failed (V 2.4). My intention is to upload it to Atutor system that supports IMS. A "waiting few seconds" message display and nothing happens. I'm working under Ubuntu Any clue? Thanks Posted by Ana Lovic

	4: Re: Re: Re: export tool failure By: Ernie Ghiglione	In response to 3	01/08/14 11:48 AM	[ Reply \| Forward ]
Hi Ana, Exporting LAMS sequences as IMS might not be useful at all. LAMS isn't able to reimport it into this format. And most likely other IMS LD compliant systems (which I don't know any just yet) might not be able to import this format either. Thanks Ernie Posted by Ernie Ghiglione

Reply to first post on this page

Back to LAMS for Tech-Heads - General Forum