Forum LAMS for Tech-Heads - General Forum: Re: Re: Registering a LAMS server with the LAMS Community

By: Ernie Ghiglione

[ Reply | Forward ]

Hi Murad,

it seems that your server is not capable to make http calls out on port 80. The HTTP 408 error is a timeout, which means that your server couldn't connect to the LAMS Community server in order to register it.

Can you try to see if there's any firewall restrictions that impede your server from making calls on port 80?

Thanks,

Ernie

Posted by Ernie Ghiglione

By: Murad Jamal

[ Reply | Forward ]

Hi Ernie,
nope, there is nothing blocks my port 80 from HTTP calls, i tested if the port open to the internet or not, it is open ...

Posted by Murad Jamal

By: Murad Jamal

[ Reply | Forward ]

your first answer above didn't work for me, still having that time out error :(

any help please !!!

Posted by Murad Jamal

By: Ernie Ghiglione

[ Reply | Forward ]

Hi Murad,

Is your server being able to resolve (DNS) the lamscommunity.org domain?

Is this a Unix or Windows server?

Posted by Ernie Ghiglione

By: Murad Jamal

[ Reply | Forward ]

Hi Ernie,
Im running Windows 7 Ultimate, and yes it can resolve your domain, this is the command shell output:

C:\Users\Administrator>nslookup
Default Server: suredc01.sure.com.sa
Address: 10.2.2.1

> lamscommunity.org
Server: suredc01.sure.com.sa
Address: 10.2.2.1

Non-authoritative answer:
Name: lamscommunity.org
Address: 74.52.89.35

i tried to register my server using my LAN network and my home WIFI network, both gave the same 408 error :(

Posted by Murad Jamal

By: Ernie Ghiglione

[ Reply | Forward ]

Hi Murad,

Follow this instructions:

http://www.fmpwizard.com/help/telnet.php

(replace the website in the instructions for lamscommunity.org instead)

and tell me what you get.

Thanks,

Ernie

Posted by Ernie Ghiglione

By: Murad Jamal

[ Reply | Forward ]

i got an error message: connection to host lost ...

when i followed the instruction on that page, my telnet first connects successfully to the community server, then when continue the other steps, it showed me that error message...
any help would be highly appreciated !!

Posted by Murad Jamal

By: Ernie Ghiglione

[ Reply | Forward ]

Hi Murad,

This is definitely something to do with your network setup rather than LAMS or the LAMS Community.

Today I even installed Win7 Ultimate to test and I was able to install LAMS and also register with the LAMS Community (see pictures).

I'm running out of ideas, but one thing to check is that you say yes when the question in Picture 1 shows up. Is that what you answered?

If you did click on Yes, then I don't know what else it can be. Sorry.

Ernie

Posted by Ernie Ghiglione

By: Murad Jamal

[ Reply | Forward ]

Hi Ernie,
unfortunately yes this was what i chose "YES" ...
:(

Posted by Murad Jamal