Forum Problems Installing LAMS: Re: Failure to install 2.2 on Windows XP


 
Search: 

2: Re: Failure to install 2.2 on Windows XP
In response to 1 01/21/09 12:19 AM
[ Reply | Forward ]
Hello Ken,

Im not sure what might have happened here, i've never come across this problem before. It certainly isnt expected output from the installer even if there is an error. All I could say at them moment is to try installing again and see if you can repeat the problem. If you do get the same problem again, please send us the installation logs under the lams directory.

On a second note I usually dont recommend using the run.bat script as it hasnt been updated in some time. You should either use the run script that is in the start menu or you can start the service manually in the cmd window by typing the following command:

sc start LAMSv2

I hope that I have been some help to you,

Luke Foxton

Posted by Ernie Ghiglione

4: Re: Re: Failure to install 2.2 on Windows XP
In response to 2 01/21/09 08:32 AM
[ Reply | Forward ]
Hi. Thanks.

The only log file is configure-deploy.log and all it contains is

and was unexpected at this time.

The installer didn't get far enough to create a service entry.

I'll need to start from the source code soon anyway so I'll probably follow those instructions instead of using the installer.

On Tuesday I'll try with a different computer and report back.

-ken

Posted by Ken Kahn

Reply to first post on this page
Back to Problems Installing LAMS